Whole-Home Surge Protection in Dallas/Fort Worth
Licensed Master Electricians · Same Day Service Often Available · Upfront Pricing
A single power surge can take out an HVAC control board, a refrigerator, a TV, and the electronics you didn't even know were at risk, all at once. A whole-home surge protector installed at your electrical panel stops those surges before they reach the rest of your house. B&B Electric's licensed master electricians install whole-home surge protection across Fort Worth, Euless, Keller, and the greater DFW metroplex, with over 2,500 jobs completed safely and to code.
We price the installation upfront before any work begins and apply your $49.99 service call straight to the job. Call (817) 600-8376.
What a Whole-Home Surge Protector Does
A power surge is a brief spike in voltage, far above what your home's wiring and electronics are built to handle. A whole-home surge protector mounts at your electrical panel and diverts that excess voltage safely to ground before it spreads to the circuits in your home.
Surges come from two places:
- Outside your home. Lightning, storms, and utility switching send surges through the power lines. North Texas storm season brings plenty of all three.
- Inside your home. Air conditioners, refrigerators, and other large appliances create smaller surges every time they cycle on and off. Over time, those repeated hits wear down the electronics in everything from appliances to smart thermostats.
Is Whole-Home Surge Protection Right for You?
It's worth serious consideration if any of these apply:
- You've lost electronics or an appliance control board after a storm
- You have expensive systems like HVAC, a pool pump, an EV charger, or solar
- Your lights flicker or dim when large appliances turn on
- You're upgrading or replacing your electrical panel
- You rely on smart home devices, a home office, or medical equipment
What Our Surge Protection Service Includes
- A panel check to confirm it's in good condition and has room for the device
- Installation of a whole-home surge protective device at your main panel
- Verifying your home's grounding and bonding, which surge protection depends on
- Advice on where plug-in surge protection still makes sense for sensitive electronics
Our Process
- Assessment. A licensed electrician inspects your panel and grounding to make sure a surge protector will do its job.
- Upfront pricing. You get a clear, itemized price before we start. No surprises.
- Installation. We install the surge protector at your panel, to National Electrical Code.
- Testing. We confirm the device is working and your panel is operating safely.
- Walkthrough. We show you the indicator light and explain what to watch for after a storm.
Surge Protection and Panel Upgrades
A surge protector is only as good as the panel and grounding behind it. If your panel is outdated, crowded, or one of the known hazard brands like Federal Pacific or Zinsco, we'll tell you honestly and recommend fixing that first. And if you're already planning a panel upgrade, it's the ideal time to add surge protection, since newer code requires it when a home's service is replaced. See Electrical Panel Upgrades & Replacement and Electrical Panel Repair.
Why Homeowners Choose B&B Electric
- Texas Master Electrician (Lic. #361128) and licensed Electrical Contractor (Lic. #41151)
- 2,500+ completed jobs and 250+ five-star reviews across DFW
- Every installation to National Electrical Code, never an unsafe shortcut
- Upfront pricing, with your $49.99 service call applied to the work
- On-time two-hour arrival windows, with same-day service when available
- Financing available on larger panel upgrades
What Does Whole-Home Surge Protection Cost?
Surge protection starts with our $49.99 service call, which we apply directly to the work once you approve the price. The final cost depends on your panel and the device that fits it, so we give you an exact, itemized quote after we take a look. You'll always know the cost before we begin.
Frequently Asked Questions
Do I still need surge protector power strips?
Yes, for your most sensitive electronics. A whole-home surge protector handles the big surges at the panel, and plug-in strips add a second layer at the device. The two work best together.
Will a surge protector protect my home from lightning?
It helps with the surges lightning sends through power lines, which is the most common way storms damage electronics. No device can stop a direct lightning strike to your home, but whole-home protection greatly reduces the everyday and storm-driven surges that cause most damage.
Is surge protection required by code?
Newer editions of the National Electrical Code require surge protection when a home's electrical service is installed or replaced. If you're upgrading your panel, we'll include it as part of the job where required.
How long does installation take?
Most whole-home surge protector installations are finished in a single visit, as long as your panel is in good condition and has space. If your panel needs work first, we'll explain what we found and price it before doing anything.
Do surge protectors wear out?
Yes. Each surge it absorbs uses up some of its capacity. Most whole-home units have an indicator light that shows when it's still protecting you. If yours is out, or you've had a major storm, call (817) 600-8376 and we'll check and replace it.
Are you licensed and insured?
Yes. We're a licensed Texas Electrical Contractor (#41151) with a Master Electrician on staff (#361128), fully insured on every job.
What areas do you serve?
Fort Worth, Euless, Keller, Colleyville, Grapevine, Hurst, Bedford, and communities across the DFW metroplex.
Protect your home before the next storm.
Call B&B Electric at (817) 600-8376 or schedule your surge protection online. Licensed, insured, and serving Fort Worth and DFW.